Pakistan Institute of Engineering and Applied Sciences (PIEAS)

By on February 9, 2013 with 64 Comments

PIEAS or PIEAS University is located in Nilore, which is around 25KMs from Islamabad. It is part of Pakistan Atomic Energy Commission and is run in the public sector. HEC ranks PIEAS as the best and top ranked Engineering University of Pakistan. This ranking off course does not tell whether its good in all fields of engineering or a particular one. However based on the research output and number of Phd faculty members it is rated as the best engineering university of Pakistan currently.

PIEAS offers degrees in the following disciplines

Electrical engineering

Mechanical Engineering

Chemical Engineering

Metallurgical Engineering

Nuclear Engineering

Computer Sciences

Management Sciences

Medical (for doctors only for training in radiation therapy)

Physics and Mathematics.

There are a total of 90 faculty members at PIEAS and around 50% of them are PhDs (one of the reasons why it is ranked so high by HEC)

There are hostel facilities available for all the students, and all students are expected to stay in hostel.

PIEAS has good indoor and outdoor sports facilities as well.

Pakistan Institute of Engineering & Applied Sciences (PIEAS)
P.O. Nilore,
Islamabad,

Phone Numbers

92-51-2207380
+92-51-2207381
+92-51-2207382
+92-51-2207383
+92-51-2207384

Please bear in mind that originally PIEAS was offering Nuclear Engineering degrees only. The other engineering disciplines have been started recently.

 

Share this post!

Tags: , ,

Category: Study Engineering

  • M. Usama Tariq

    i wana know about the criteria of entry test….

    • jehanzeb_ahmad

      Dear Usama
      The entry test at PIEAS has four sections-
      English
      Maths
      Physics
      Chemistry.
      It will be from F.Sc / A levels. A total of 100 questions with 3 marks for a correct answer and -1 for a incorrect answer so guess work will hurt in this test. The duration is 3 hours.

      • qamar idrees

        i wana know abut test date in PIEAS.. if you know then plz tell me.

        • jehanzeb_ahmad

          The entry test date for PIEAS is 16th June 2013 for all new admissions
          Jehanzeb

      • http://www.facebook.com/people/Asad-Ali-Baloch/100001806712798 Asad Ali Baloch

        how many total seats are there in PIEAS

        • jehanzeb_ahmad

          Usually 100 seats for each engineering discipline per year.
          Jehanzeb

    • jehanzeb_ahmad

      Dear Usman
      I am assuming entry test of PIEAS. Well it has English, Physics, maths, and chemistry. Sample entry test is available on the PIEAS website.
      Jehanzeb

      • Mannan Tirmizi

        Aoa
        What would be the best way to prepare for the PIEAS entry test 2013 considering i am an A level student.

        • jehanzeb_ahmad

          Just revise your course for maths, physics, chemistry of O levels and A levels and you should do just fine in the test.
          good luck
          Jehanzeb

  • hamza

    what is the merit for nuclear engineering in pieas

    • jehanzeb_ahmad

      Dear Hamza
      It varies each year and made based on entry test and FSc marks. You should have around 75% in FSc and do well in the entry test. I cant tell you more on this.
      Jehanzeb

  • Shomail Arif

    Can I still apply to the University?

    • jehanzeb_ahmad

      Dear Shomail,

      Last date to apply for admission at PIEAS was 17th May 2013. Admissions are now closed even with late fee.
      Jehanzeb

  • Kainat Nawaz Jutt

    My best friend couldn’t apply for admission in PIEAS within the due date ,Can she apply now before entry test?
    Please tell.

    • jehanzeb_ahmad

      Dear Kainat
      The last date was May 17th 2013. I am sure they will not entertain more applications, but you can check with the admissions office directly.

      regards
      Jehanzeb

  • Hina Khan

    sir, what is total expenditure for bs engineering in PIEAS… ??

    • jehanzeb_ahmad

      Dear Hina
      The expenses at PIEAS or any typical private university is usually around Rs 1,20,000 per year so multiply that by 4.
      Jehanzeb

  • Muhammad Shahbaz Shahid

    Sir what is the merit of mechnical engineering in PIEAS?

    • jehanzeb_ahmad

      Merit is not just based on marks in Fsc, but also marks in the entry test. Therefore its hard to tell what the final merit would be. You just have to do well in the entry test as it carries around 50% marks

  • Syed Hussnain Ali

    sir i have 68% marks in fsc-1 how much score should i have in entry test???? to get admission in electrical eng

    • jehanzeb_ahmad

      I would say more than 70% in entry test. But this is just an estimate as it varies each year depending on how many students apply

  • Odoon Arnold

    Sir i Applied for MS (Computer) and want to Fellowship. i have ‘A’ Grade in SSC ,’C’ Grade in HSC and approx BS ‘A+’ Grade. is any chance to selected or relaxation in Entry Test? Because i am Confused and not sure about Physic part in Entry Test i am not a physic student i studied physic 7 year ago.
    Thanks

    • jehanzeb_ahmad

      Usually one second division is allowed for Government jobs through out the academic career. So I think you should be eligible, however the physics problem will remain. try to prepare as much as you can from standard physics text books.

      good luck
      Jehanzeb

      • Odoon Arnold

        Thank you. yes i will study physic if it will come again in my Course Outline. i am just talking about Entry test.

        • jehanzeb_ahmad

          Well try to revise as much as you can before the entry test. I think the date for entry test at PIEAS is already past.

          • Odoon Arnold

            Yes it was at 15 June. Sir do you know about the grading and Test qualification procedure? if so then Let me know.

            Thanks

  • Odoon Arnold

    Yes it was at 15 June. Sir do you know about the grading and Test qualification procedure? if so then Let me know.

    Thanks

  • Odoon Arnold

    Sir i saw every where about selection procedure for BS. i mean aggregate percentage. but i did not see aggregate percentage for MS. can you help how to calculate aggregate percentage for MS?
    Thanks

    • jehanzeb_ahmad

      Dear Odoon
      Do you want to calculate your own percentage that you obtained while doing your masters? or do you want to know the eligibility criteria for a masters degree program? I am not sure what you want to calculate.

      • Odoon Arnold

        Dear Sir,

        I meant that i am seeing selection percentage of BS like 60% of test, 15% of Matric and 25% of HSC. but i did not see any selection percentage of MS.

        • jehanzeb_ahmad

          Dear Odoon,

          There is no such criteria for admission in masters, other than that you need to have a CGPA of over 2.5 or 60% marks in aggregate, a relevant bachelors degree with minimum of 120 credit hours.
          regards
          Jehanzeb

          • Odoon Arnold

            Thank you, Sir.

            Yes i Know the eligible Criteria of master. i have given test for MS. and Waiting for Result. Pray for me for better result.

            Thank You.

          • Odoon Arnold

            SIr do you know the expected date of result?

          • jehanzeb_ahmad

            It was in their ad. Please check PIEAS website admission ad.

          • Odoon Arnold

            it is not on there. the date was present in Admit slip which is 1st week on July. but it is going 3rd week of July. that the reason i asked you. i also asked their administration, they said that i don’t know.

            Thanks

  • Kamran Ejaz

    sir i want to take admission in MS mechanical next year if you can plz tell me the total number of seats available in MS program.

    • jehanzeb_ahmad

      in which university?

      • Kamran Ejaz

        in pieas

  • Kamran Ejaz

    sir if you can please tell me that whether i can apply for more than one MS program

    • jehanzeb_ahmad

      yes you can. There is no restriction

  • Abdul Rehman

    Sir, plz tell me the date of result of entry test 2013 of pieas university

    • jehanzeb_ahmad

      They havent announce it yet.
      Jehanzeb

  • ASIF IQBAL

    Sir I have 2 second Divisions.. I want to get admission in PhD Physics in PIEAS.. can i apply? is there any relaxation of 2 second div for PhD…i have 1st div in SSC, FSC and MPHIL.

    • jehanzeb_ahmad

      Dear Asif
      I am not sure about this condition. Usually you are not eligible for Government jobs if you have 2 second divisions. I dont think HEC has any such condition for PhD. I ll check and if I find out any thing I ll let you know.

      • ASIF IQBAL

        Thanks Sir. Well HEC criteria is that one have 70 % marks( 3 CGPA) in MS/M.PHIL for getting admission in PhD … so in that case I am eligible For admission in PhD. But universities have their own rules set for PhD.. I can apply for NUST, CIIT, IIUI and many others.. But for Pieas I am not sure.. so kindly I need urs help in this case…
        Regards….

        • jehanzeb_ahmad

          I think PIEAS would be following the same HEC criteria, so you should be ok. Just directly check with them as well

  • Muhammad Nauman Zafar

    Pieas ka result kb ana hy …………… koi hy jo bataye

  • Abdul Rehman

    thanks

  • Kamran Ejaz

    pieas k next year k ms program ki advertisement kb hogi

    • jehanzeb_ahmad

      A lot of universities do two intakes per year for the MS program. I dont know what the policy of PIEAS is. If they do two intakes, then expect an advertisement around december of this year. If they dont, then next July 2014. I ll post on my site when they announce it, so if you have liked my FB page you ll get the update.
      Jehanzeb

  • Asad Ejaz

    salam

    sir i want to know that how much marks % should i have to sit for entry teat in Fsc and matric for Electrical engineering…thank you

    • jehanzeb_ahmad

      Minimum marks required are 60% in fsc for any engineering program in Pakistan.
      Jehanzeb

  • Nabeel Butt

    Sir plz tell me how merit is Calculated For BS programmes?

  • Nabeel Butt

    And Anyone Having 2nd Division in MSC can apply for M.Phil?

  • Adil Ahmed Khan Tanoli

    sir can u tell me what percentage is required by federal board student in inter for applying in mecahnical engneering in pieas

  • haris

    best university for software engineering?

  • muhammad ijaz

    Respected sir. can you tell me that Bs mining engineer cane aply for ms program in material and metallurgy engineering in PIAZ, and also next date for admissions?

  • aliakmal

    Respected sir can u plz tell me the b.tech students are eligible for ms engineering or not in PIEAS.

  • Shahida parveen

    Aoa Sir, Sir i submitted the M.phil thesis. Can i apply for the test which will be held in June 2014 i want to get the admission P hd in plasma physics

  • Kumail Javaid

    Want to know what is the required approximate aggregate for Bs engineering in PIEAS this year?

  • Kumail Javaid

    Is there fixed seats for each division, For instance only 6 students will be selected from each division even if they have got high score? Hmm?

  • abuzar

    Sir, how many hostel dues are in pieas for bs students….
    And who is eligeble for scholarship from us aid.

  • saud gaziani

    Sir, what grades are needed in o,level and a,level for admission in pieas for engineering field?

  • anaya

    sir, mary 820 marks hn ICS ma . kia mujy next year admisn mil sakta ha software engineering main ?